Warning: mkdir(): No space left on device in /www/wwwroot/new9.com/func.php on line 127

Warning: file_put_contents(./cachefile_yuan/65555501.com/cache/e6/8df01/62c46.html): failed to open stream: No such file or directory in /www/wwwroot/new9.com/func.php on line 115
Fiber Optical Multiplexer,Interface Converter,Network Switches,TDM over IP-Fctel Technology Co.,Ltd




  • 黄瓜下载官网,黄瓜AVAPP,黄色视频黄瓜视频,黄瓜视频在线观看入口

    Hello, Welcome to FCTEL Technology Co.,Ltd
    National service hotline:+086 0571-87007055/56/57 CN

    WE ONLY FOCUS ON TRANSMISSION AND ACCESS

    Products center

    Industrial Grade 1-2 channel CAN Bus Fiber Modem

    Type:FCM-C1/2 Message

    Description:1 fiber interface; 1~2 CAN bus interfaces;Simultaneous transmission of 1-2 CAN bus data over fiber.

    Product Description
            The CAN fiber modem can transfer CAN bus signal to optical signal and transmit over fiber which can extend the communication distance of CAN bus. At the same time due to adopting optical fiber communication it solves the problems of electromagnetic interference ground ring interference and lightning damage and greatly improves the reliability security and confidentiality of data communications and can be widely used in various industrial control process control and traffic control applications. It is particularly suitable for banks power and departments or systems that have special requirements for electromagnetic interference.
    Functional Properties
    ◆ based on proprietary integrated circuit;
    ◆ Provide 1~2 CAN bus interface an optical port;
    ◆ CAN transparent data transmission without any set;
    ◆ CAN interface Maximum number of nodes 128CAN interface rate 0-1Mbps;
    ◆ CAN interface speed in line with international CAN1.0 CAN2.0 standard;
    ◆ DC9-55V or AC7-50V wide supply that includes an automatic polarity detection function no need to distinguish positive and negative installation;
    ◆ Provide DIN 35mm rail mounting or wall mounting;
    ◆ CAN interface with lightning protection lightning reached GB / T17626.5 (IEC61000-4-5)Short circuit current wave 8 / 20μs open standard peak output voltage 6KV.
    Technical Parameters
    ◆ Fiber          
    Optical port：1 
    Optical Fiber：Single/Dual fiber
    Fiber interface：FC/SC/ST
    Wavelength：850nm/1310nm Multimode；1310nm/1550nm Single mode
    Receive sensitivity range：-28dBm~- 40dBm
    ◆ Can bus interface     
    Standard
    Protocol: In line with international CAN1.0 CAN2.0 standard
    Rate: 0～1000Kbps
    Physical Interface: Industrial Terminals
    CAN Definitions: CANH CANL GND
    ◆ Electrical and mechanical feature 
    Relay-free transmission distance: 20~120Km
    Typical transmit power: 
    Single mode1310/1550nm：≥-9dBm
    Multimode850nm：-18dBm
    Multimode1310nm: -25dBm
    System power： AC7V ～50V；DC 9V~ 55V
    Power consumption： ≤2W 
    Size:  (L × W× H)  72×125×26mm DIN Rail type
    ◆ Working environment  
    Operating temperature：-40℃—+85℃ 
    Storage temperature：  -40℃—+85℃
    Working humidity：    0%—95% (No condensation）
    MTBF：    ＞100000 hour
    Application Scheme
    Industrial Grade 1-2 ch CAN Bus Fiber Modem
    
    网站地图